RealVision Max 3D transducers ensure maximum sonar image detail and accuracy only when they are correctly installed. In addition to the official installation manual, be sure to follow these principles:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Depth below waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

4. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

• Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

• When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-400 stainless steel through-hull transducer with 8 m cable

The RVM-400 series sensors feature DownVision, SideVision, a 600-watt high CHIRP frequency signal and 3D sonar support. The transducer features a built-in Attitude and Heading Reference System (AHRS) that stabilises 3D sonar images by automatically compensating for vessel movement. The RVM-400 series also has a built-in fast-response water temperature sensor for quick and accurate readings.

RVM-400 is a single sensor designed for boats with a 0° hull deadrise, such as skiffs, flat-bottomed (or partial-bottomed) workboats, etc. 

The RVM-400 anduril features 0° sonar elements within surface-mount housings and the sensor is designed for installation on a flat, perpendicular-to-the-water-surface base or part thereof. The kit includes an 8-metre sensor cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

• 600W traditional CHIRP
• High-performance Down and SideVision elements
• Aerodynamic housing with insulation board
• 8m cable
• The RVM-400 adapter is suitable for a boat hull with a 0° angle.

Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-400 RealVision 3D Max 0° üksik andur appeared first on NavSystems.

The Raymarine CPT-100DVS is a compact and affordable transom-mount sonar transducer that offers high-quality CHIRP DownVision and fishfinder sonar imagery and accurate depth readings. Thanks to its simple design, the CPT-100DVS is quick to install and is ideally suited for outboard-powered boats.

• Maximum depth CHIRP DownVision: approx. 180m / Fishfinder: approx. 270m
• Frequency CHIRP DownVision / Fishfinder
• Beamwidth (L/H) 25°/60°
• Shows depth/temperature
• Approved body material: fibreglass / wood / metal
• Cable length (feet/m) 33 feet/10 m
• Protractor tilt 0–90°

Compatibility with Raymarine chartplotters:

Element S
CPT-100DVS andur Hello Element S with a series of plotters.

Dragonfly
CPT-100DVS product code A80351 Hello Dragonfly Serial, Dragonfly **andur** is: R70373 (which is discontinued)

Axiom Pro S and Axiom 2 Pro S
CPT-100DVS andur Hello, I am Axiom S with a series of plotters

Element HV
To connect the CPT-100DVS Element HV The plotter is needed A80559 Adapter cable.
NB! To get a 3D image on the Element HV screen, an HV (HyperVision) sensor is still required.

Axiom, Axiom+ RV, Axiom Pro RVX, Axiom2 Pro RVM series sonar models.
Connects directly Axiom DV with models. Axiom RV and RVX and RVM To connect to chartplotters A80490 Adapter cable.
NB! A RV/RVM (RealVision) transducer is still required to display a 3D image on the Axiom RV or Axiom2 Pro RVM screen.

Instructions:

Download CPT-100DVS ahtrianduri Installation guide

The post CPT-100DVS ahtriandur 10m kaabliga appeared first on NavSystems.

RealVision Max 3D transducers ensure maximum sonar image detail and accuracy only when they are correctly installed. In addition to the official installation manual, be sure to follow these principles:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Precise and symmetrical installation is critically important!

• The hardware must be installed exactly parallel, the same distance from the stern of the boat.

• If one sensor is ahead of or behind another, The sonar image is shifting..

• Andurite The distance must not exceed 2 metres (preferably up to 1 metre on either side of the wedge).

4. Depth below the waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

5. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

• Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

• When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-412 stainless steel thru-hull transducer pair, 12-degree angle, 2 m Y-cable and 8 m extension cable

The RVM-400 series sensors feature DownVision, SideVision, a 600-watt high CHIRP frequency signal and 3D sonar support. The transducer features a built-in Attitude and Heading Reference System (AHRS) that stabilises 3D sonar images by automatically compensating for vessel movement. The RVM-400 series also has a built-in fast-response water temperature sensor for quick and accurate readings.

The RVM-412 is a pair of starboard and port transducers designed for boats with a hull deadrise of 5° to 15°. Each transducer element is tilted 12° to compensate for the hull deadrise. 

The RVM-412 transducers have skewed sonar elements inside surface-mount housings. The skewed elements ensure proper alignment of the sonar beam for maximum performance, while eliminating the obstruction and turbulence associated with transducer installation behind a blocking fairing. The kit includes a Y-cable that internally connects the two transducers and an 8-meter RV(M) transducer extension cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

• 600W traditional CHIRP
• High-performance Down and SideVision elements
• Aerodynamic housing with insulation board
• 2M Y-cable
• 8M extension lead
• RVM-412 andurid are suitable for boat bottoms with a 5°-15° angle.

Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-412 RealVision 3D Max 12° nurgaga andurite paar appeared first on NavSystems.

RealVision Max 3D transducers ensure maximum sonar image detail and accuracy only when they are correctly installed. In addition to the official installation manual, be sure to follow these principles:

1. Select the correct power supply – this is the utility battery

Do not connect Axiom2 Pro RVM-i Attach the RVM1600 sonar module to the starter crank.. The sound generated when the engine starts Ping-pong can To cause the sonar image to be lost, which disrupts the device's operation and navigation.

2. Avoid installation locations that create turbulence

The floor covering must not be installed in the vicinity of air intakes, protruding parts or other obstructions, which can cause Turbulence and air bubbles – these affect sonar image quality.

3. Precise and symmetrical installation is critically important!

• The hardware must be installed exactly parallel, the same distance from the stern of the boat.

• If one sensor is ahead of or behind another, The sonar image is shifting..

• Andurite The distance must not exceed 2 metres (preferably up to 1 metre on either side of the wedge).

4. Depth below the waterline

The doors must be installed at least 300 mm below the water line – during travel, to ensure continuous water contact.

5. Effect of magnetic fields on the AHRS system

RVM users have Integrated AHRS (Attitude and Heading Reference Sensor), stabilises the sonar image.

• Avoid installation metal and components with strong electromagnetic radiation nearby (e.g. engine blocks, inverters, chargers, electrical panels).

• When necessary Turn off the AHRS function from the menu If it does not work correctly due to interference.

RVM andurid ei sobi Axiom+ RV, Axiom2 RV ja Axiom Pro RVX mudelitega.

RVM-420 stainless steel thru-hull transducer pair, 20-degree tilt, with 2m Y-cable and 8m extension cable

The RVM-400 series sensors feature DownVision, SideVision, a 600-watt high CHIRP frequency signal and 3D sonar support. The transducer features a built-in Attitude and Heading Reference System (AHRS) that stabilises 3D sonar images by automatically compensating for vessel movement. The RVM-400 series also has a built-in fast-response water temperature sensor for quick and accurate readings.

The RVM-420 is a pair of starboard and port transducers designed for boats with hull deadrise angles of 15° to 25°. Each transducer element is tilted 20° to compensate for the hull's deadrise. 

The RVM-420 transducers have their sonar elements offset within the surface-mount housings. The offset elements ensure the sonar beams are aimed correctly for maximum performance, while eliminating the obstruction and turbulence associated with installing a transducer with a blocked dome. The kit includes a Y-cable that internally connects the two transducers and an 8-meter RV(M) transducer extension cable.    

Works with Axiom 2 Pro RVM series and RVM1600 external sonar module

Features:

• 600W traditional CHIRP
• High-performance Down and SideVision elements
• Aerodynamic housing with insulation board
• 2M Y-cable
• 8M extension lead
• The RVM-420 andurid are suitable for the bottom of a boat with a deadwood angle between 15°-25°.

Instructions:

Download RVM-400 RealVision Max 3D Andurite paigaldusjuhend

Download RVM-400 RealVision Max 3D Mounting template

The post RVM-420 RealVision 3D Max 20° nurgaga andurite paar appeared first on NavSystems.

The Raymarine CPT-S transom mount is a spare part that includes all the necessary mounting hardware to install a transom-mounted transducer onto the stern of a boat (transducer not included). Sometimes, a transom-mounted transducer can hit a rock or a trailer roller can damage the transducer. The transducer itself and the mount are separate parts, so if the transducer is still intact, the issue can be repaired at a moderate cost. The Raymarine CPT-S transom mount includes a plastic transom bracket, a plastic transducer bracket, a bolt and nut, locking washers, and mounting screws.

Compatibility Fully compatible CPT-S aethelred

Guides 

Download CPT-S heater installation guide

The post CPT-S ahtrianduri kinnitus appeared first on NavSystems.

The post Adapterkaabel CPT-S või DVS anduri ühendamiseks Element HV seeriaga appeared first on NavSystems.

The Raymarine CPT-DV and CPT-DVS (Dragonfly) transom mount is a spare part that includes all the necessary mounting accessories for installing the transom transducer to the stern of the boat (transducer not included). Sometimes, the transom transducer hits a rock or the trailer roller breaks the transducer. The transducer itself and the mount are separate parts, and if the transducer remains intact, the repair can be made at a moderate price. The Raymarine CPT-DV and CPT-DVS transom transducer mount includes a plastic transom bracket, a plastic transducer bracket, a bolt and nut, locking washers, and mounting screws.

Compatibility Fully compatible CPT-DV and CPT-DVS Libellule aethelred

Guides 

Download CPT-DV and CPT-DVS speed sensor installation guide

The post CPT-DV ja CPT-DVS ahtrianduri kinnitus appeared first on NavSystems.

The Raymarine RV-100 / RVM-100 transom mount is a spare part that includes all the necessary mounting hardware for installing the transom sensor on the boat's transom (sensor not included). Sometimes, the transom sensor can hit a rock or the trailer roller can break the sensor. The sensor itself and the mount are separate parts, and if the sensor is intact, the item can be repaired at a reasonable cost. The Raymarine RV-100 and RVM-100 transom mount includes a stainless steel transom bracket, a plastic transducer mounting shoe, bolt and nut, locking washers, and a cable entry cover.

Compatibility Fully compatible with RV-100 and RVM-100 pressure transmitters

Guides 

Download RV-100 Atherton Installation guide

Download RVM-100 atriums Installation guide

The post RV-100 ja RVM-100 ahtrianduri kinnitus appeared first on NavSystems.

The power cables are different for various Axiom series; for Axiom / Axiom+ / Axiom2 / Element chartplotters, [this] is suitable R70561 mains lead with plug.

Axiom Pro / Axiom XL series is suitable for chartplotters R70029 braided power cable

Suitable for Axiom 2 Pro / Axiom 2 XL A80745 power cable for nurgaga.

The post Nurgaga 25pin – 25pin RVX/RVM anduri adapterkaabel appeared first on NavSystems.

• CHIRP DownVision photorealistic images of the ground structure using technology
• DownVision performance up to a depth of 183 m
• Dual-channel CHIRP sonar: CHIRP DownVision Through the sidescan sonar channel, you can simultaneously view high-resolution images of the bottom structure and target fish.
• Connect the CP100 to the latest Raymarine multifunction displays. From the compact A-Series to the gS-Series, the CP100 offers underwater imagery up to 1280 x 800 pixels. 

Underwater images and amazing CHIRP technology

Thanks to the network connectivity of the CP100 sonar module, CHIRP DownVision technology now available on Raymarine multifunction display. DownVision technology offers photorealistic underwater images, presents astonishingly detailed images of the seabed structure and simultaneously displays target fish.

Unlike conventional sonar modules, the CP100 uses CHIRP technology and transmits a wider range, resulting in high-resolution, photorealistic images.

Specifications

Instructions:

Download CP100 internal fishfinder module Installation guide

The post CP100 Downvision Sonar Module appeared first on NavSystems.